3D Printed RC Car using GT2 Belt System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is DIY RC Car model using the A2212 Brushless motor and the GT2 belt system
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi there
This is my new project 3D printed RC car using the GT2 Belt system. I think some of you might be familiar with the GT2 belt system. It consists of 2 or more pulleys and uses the GT2 belt for rotating the pulley...
It is quite a fun project if you enjoy the combination of the RC Car and 3D printing..
So let's build it.
I use the Elegoo Centauri Carbon and the Flashforge AD5X for printing this project.
Mainly use the PETG for this project because it's cheap and it is more durable than the PLA
The setting for PETG is 220 for the nozzle temp and 70 for the heated bed