Parametric USB Car Port
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for a UEM car port that no longer worked. Thread a male to female USB cable through, and snap it in place.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
A snap-in port to replace the UEM USB port on my 2017 Nissan Rogue. I upgraded the radio, but couldn't retain use of the original port.
Prints as one piece; use supports for the tabs that hold it in place. Just pull the male end of a male-to-female USB cord through the front, and the female end nestles in to the user-facing side. Then it just snaps into the empty space in the car.
I included the .f3d file, with key parameters favorited so you can customize it to your car and cable. The design does NOT currently support angled USBs; if someone wants that added, I can probably work on it.