1 / 5
Parametric Beaker Holder for Ultrasonic Cleaners
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal parametric beaker holders for two-stage IPA cleaning in ultrasonic cleaners; fully customizable for any basket
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
What is this?
A fully parametric beaker holder system for ultrasonic cleaners that allows the use of standard beakers in ultrasonic cleaners to safely wash 3D-printed parts with IPA in a one- or two-stage configuration.
Originally was designed for the UniFormation W230, but the design can be easily customized in Autodesk Fusion 360 to fit virtually any ultrasonic cleaner basket by simply adjusting a few parameters (see below).
Available parameters
| Parameter | Default Value | Unit | Description | |
|---|---|---|---|---|
| beaker_od | 109.60 | mm | Outer diameter of your beaker at the widest point | |
| beaker_clearance | 0.40 | mm | Gap between beaker and holder for easy insertion/removal | |
| wall_thickness | 10.00 | mm | Thickness of the holder plate | |
| clip_thickness | 5.00 | mm | Thickness of the clip grabbing the basket | |
| basket_width | 132.50 | mm | Width of the ultrasonic cleaner basket at the clamping point | |
| basket_clearance | 0.05 | mm | Gap between clips and basket for proper grip | |
| clip_height | 5.00 | mm | Vertical height of the clip that grabs the basket rim |
Instructions
- Open the .f3d file in Fusion 360
- Click "Modify" → "Change Parameters" in the toolbar
For a different basket:
- Modify
basket_width(measure your basket rim width) - Adjust
basket_clearance
For different beakers:
- Insert your
beaker_od(measure beaker outer diameter) - Adjust
beaker_clearance