Wheel center caps adapter for original Škoda emblems
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel center caps adapter for original/genuine Škoda emblems of diameter 56mm to rims with 60mm hole. Fit is VERY tight!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Wheel center caps adapter for original/genuine Škoda emblems of diameter 56mm to rims with 60mm hole. Fit is VERY tight, which is on purpose, so after inserting emblems it is necessary to use pliers to twist it in locked position (for me worked long nose pliers the best). I made these from PLA, because our car is mostly parked in garage, but for cars that park outside with prolonged periods of time with direct sunshine, I would recommend to use a material that is somehow UV resistant.
Perimeters: 3
Supports: Support on build plate only
Layer height: 0.15
Nozzle diameter: 0.40
Profile: SPEED
Printed on PRUSA CoreONE
If you like my work, you can buy me a coffee here :)
Disclaimer: not for commercial usage. If you wish to use my work for such purposes, please contact me directly.