Phone holder for Bike (interchangable mounting)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple phone holder with the option to swap mounts.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I desigend this print to use it on my foldable bike when i am traveling, its great when you want to use Google Maps!
Assembly instrucions:
01. Put on the clamps on the screw, L and L are marked and belong together (one side is left, the other is right threaded)
02. Screw on the clamp just enough so you can put on the “Screw_Head” and put the other side the same distance from the middle (roughly 32mm)
03. Now you can turn the screw until the clamps are in place and connect the screwhead with a piece of filament
04. After that you need to insert the “Pins”, just use a hammer for that
05. Now you can put a adapter of maybe even you own design
Notes:
- If you use “Mount_1_Bike” you also need a M5 Nut and A M5x16mm bolt, to secure the the adapter to the basis i also used an M5x20mm screw.
- I designed the phone holder so people would be able to remix different adaptors for different applications, the "Mount_Basis_For_Remixes" is in the files, a drawing of it is also at the end of the pictures.
- “Screw_95p” is the scaled down version of the Screw for slightly looser tolerances, and has built in support.
- Everything is printed in PETG, PLA should work too, but maybe would cause Problems with “Mount_1_Bike”
- The diameter of the bicycle handle for “Mount_1_Bike” is around 22mm