Steamdeck Multiboard Mount - low profile, clip in, adjustable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount is adjustable with screws so it can be positioned more finely on a multiboard.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
Overview
I needed a specific bracket for my flipdeck project that is more finely adjustable, lower profile, and clips in the steamdeck: https://www.printables.com/model/1469356-flipdeck-the-multiboard-cyberdeck
BOM
This mount requires some hardware as it's firmly attached to the multiboard:
- 2 x M4 nuts
- 2 x 8mm M4 bolts
- 4 x M3 nuts
- 4 x flat head, counter sunk M3 x 8mm bolts
Assembly
Included here are hooked snaps that use M4 nuts that require access to the back of the multiboard. If this isn't usable for you, try the regular, non-hook M4 snap: https://thangs.com/designer/Multiboard/3d-model/Drop-In%20Nut%20-%20Weight%20Bearing%20Snap%20-%20M4-1030689
Or you can try gluing in the M4 nuts to keep them in place before snapping to the board.
- Add M4 nuts to the snaps, push the snaps into the multiboard
- Press fit the M3 nuts into the bracket
- Screw in the bracket to the snaps, use a hex key with M4 bolts to the multiboard through the access holes.
- Position the mount on the bracket and screw it into the bracket using the countersunk m3 bolts.
Added step files for easy remixing.