XShot MPP Wide Charging Handle (Thicker Shell)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the T-pull made by N8than, now with a thicker top shell for better rigidity.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 147
- Wydruki
- 3
- Wyświetlenia
- 412
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a remix of the charging handle by N8than (loose tolerance version; which is still nice and snug, as the original was incredibly tight). The only change here is a thicker top shell for added rigidity, since the original was fairly thin and warped for me slightly.
I printed mine with 4 walls and 15% gyroid infill. No brim should be necessary with good plate adhesion. I slowed down my bridging slightly so I could get a clean interior while printing with the top-side up. This also let me iron the top surfaces to get a nice clean finished piece.