Sofle RGB Case - Gasket Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gasket Mount Sofle RGB case and switch plate
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a gasket mount Sofle RGB case. So You'll want to put some poron foam strips along the tops of the vertical walls of the lower case and then add some along the edges of the top of the switch plate. Then when you assemble it, you'll have a gasket sandwich. This case has also been designed so that you have room to pour in some silicone or place some foam or sand or anything you want for sound damping.
If you choose to CNC the switchplate out of PC, you'll likely get better sound. I printed out of PETG and think that while the feel is good, the sound is a little on the poppy side. Not clacky, just poppy.
The holes are sized for heat set inserts of, if I remember right, M2 size. I also had better luck sorta opening the hole more with a drill, but I think I could have gotten away without that. You may want to print a section of it and try installing an insert first before printing the whole thing.