Tonex Controller 4.3" with Footswitches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D-printable enclosure is purpose-built for the Waveshare ESP32-S3 Touch LCD 4.3B development board, specifically…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D-printable enclosure is purpose-built for the Waveshare ESP32-S3 Touch LCD 4.3B development board, specifically tailored to support the Tonex One Controller project. Ideal for building a robust, portable MIDI controller or custom interface, the case offers both protection and ergonomic usability for interactive touch-screen applications with 2 footswitches.
Designed for: Waveshare ESP32-S3 Touch LCD 4.3B (https://www.waveshare.com/esp32-s3-touch-lcd-4.3b.htm?sku=27848)
Project compatibility: Tonex One Controller (https://github.com/Builty/TonexOneController)
Others: DC Socket 5.5x2.1 (10mm radius): https://share.temu.com/4tyjmNuobNA On/Off switch 10x15mm: https://a.aliexpress.com/_Ezlvo06 Mini footswitches (7mm radius): https://share.temu.com/hSAmD8HrEbB
Tip: Remember to connect all GND terminals together.
Preview printed on Anycubic Kobra S1 with PLA+ 0.2 25% in place on diamond textured build plate.
Category: Music