Anti-slip foot for Ikea Marius
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
prevents slipping on wet surfaces such as on the wet floor in the bathroom or on a balcony
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
The leg is designed for the Ikea Marius stool, but it should fit on any other stool with a tube diameter of 19 mm (or 3/4").
I designed it in Tinkercad for my disabled mom who needed a stool in her shower. Unfortunately, the chairs from medical insurance company were too big so we decided for Ikea Marius which is small, solid and for very affordable price. The only con are plastic ends of the legs which are sliping on ceramic tiles. So flippity jippity … here is the solution :)
I recommend to use softest TPU you are able to print like 30D or 80A shore hardness or even softer. I've printed it with Fiberlogy Fiberflex 30D.
Print settings: 15% infill, 0,25mm layer height, 0,4mm nozzle and “AmazonBasics TPU” profile on Prusa Mini+. I don't recommend much higher infill otherwise the print will shrink and warp.