elceram ESC plate for xray x4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
alternative mounting plate for the Elceram Nitride ESC for XRAY X4
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to balance out the weight of my battery pack so I designed this ESC plate for Elceram Nitride ESC. The plate both adds some weight by itself and also moves the ESC further out, which leads to nearly perfect balance for my setup. your milage may vary.
It is designed for Ruthex M3 brass heatset inserts and you will require two of those and two M3x6 countersunk screws. The ESC itself mounts with the two screws from the original carbon mounting plate.
I printed it in PETG-CF for rigidity and temp resistance. In case it melts or deforms, I printed some spares in ASA as well.