LED holder for AD5X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for fitting cheap 24v LED strip for AD5M / AD5MPRO into AD5X printers
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 157
- Wydruki
- 2
- Wyświetlenia
- 1277
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A holder for fitting AD5M/5MPRO cheap 24v LED strips £2 - £4 (from aliexpress) into AD5X printer as I couldn't find any to fit Flashforge's ad5x holder.
*EDIT 21/11/2025 V7 redesign with smaller footprint less overhang prevents contact with bowden tube*
Modelled in tinkered by myself, It's angled towards print bed recessed for 2 X 10mm x 2mm magnets in base, and has overhang to cut glare works well with time-lapse if you have camera fitted.
You will need to desolder or snap off passthrough connector on one side to fit in neatly.
I used flexible glue to fix strip although sticky pads/tape might work.
Full fitting video on my YouTube channel