2009 6.0LS Swap Passenger Ignition Coil Pack Cover - 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A driver side coil pack cover for 09' 6.0 LS's.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
A decorative cover for the ignition coils which mount onto the coil bracket's studs using rod connectors. The piece is made by scaling the model in the slicer to 101%, splitting the model, and welding both halves after print.
I designed this part to fit my LS swapped 1970 Cutlass, and took into account the tight constraints around the massive evaporator casing and that god awful vacuum canister placement.
Directions -
To print this part with a smaller printer like the Bambu A1 I used, you'll need to split the part in your slicer program (I used Bambu Studio) and weld the pieces after printing. The model is designed to be split perpendicular of the model through the back bracing, which is twice the rest of the model's thickness.
I would recommend joining the pieces thermally using a cheap plastic welding kit (Harbor Freight sells one for around $20), and refinishing the part with a little sanding, some plastic promoter and filler, along a paint job which additionally provides UV protection.
For printing, I used the base Bambu ABS template for it's preset bed and nozzle temperatures, combined with eSUN's ABS+ filament. It's CRUCIAL to scale the model by +1% to compensate for shrinkage after printing is complete (I've given myself much grief forgetting this).