BETA BIONICS ILet Insulin Pump Wireless charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beta Bionics ILet Insulin pump wireless charger
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
BETA BIONICS ILet Insulin Pump Wireless charger
It's pretty straight forward; I needed to charge my pump and didn't want to remove the infusion set connector, so made a holder and there is a pocket on the side that allows the unit to stand upright without interfering with the connector.
Materials:
I used ASA but PLA will work fine
Items Needed:
- Wireless Charger (I used this one from amazon https://a.co/d/i9tvgLU )
- Double sided tape (Glue will work as well)
For attaching the backplate I used double-sided tape. Using glue is fine too, I just didn't know if I was going to need a revision made so I chose the less permanent option.