1 / 7
BETA BIONICS ILet Insulin Pump Wireless charger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Beta Bionics ILet Insulin pump wireless charger
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
BETA BIONICS ILet Insulin Pump Wireless charger
It's pretty straight forward; I needed to charge my pump and didn't want to remove the infusion set connector, so made a holder and there is a pocket on the side that allows the unit to stand upright without interfering with the connector.
Materials:
I used ASA but PLA will work fine
Items Needed:
- Wireless Charger (I used this one from amazon https://a.co/d/i9tvgLU )
- Double sided tape (Glue will work as well)
For attaching the backplate I used double-sided tape. Using glue is fine too, I just didn't know if I was going to need a revision made so I chose the less permanent option.