4wd Belted Rally Chassis 3.gen.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an AWD Belt drive Rally offroad chassis. Created for all purposes, on and offroad, with long suspension travel.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Updates coming soon!
The chassis is sculpted out in one piece ( large build plate needed! 280 x 250 ) , which gives maximum strength 💪 , and less weight, much less screws needed, and makes it cheaper to build. For the maximum performance I recommend to use Easy PA filament. The greatest challenge is whith a 3D printed chassis are the impact resistance. I crashed many times to find all the week points, and improved strenght where it was necessary. Fixed problems: 1. Weight reduction, 2. Suspension arms hinges strenght, 3. Chassis owerall strenght, 4. reduced printing times and less material necessary. 5. Improved power consumption efficiency, by minimising frictions and by adjustable belt tensioners. 6. Easy maitenance, 7. Enclosure for protecting from dirt and stones.
PARTS:
Timing Belts: x2 S3M-351
Motor+ESC: Hobbywing EZRUN MAX10 G2 80A/140A 2-3S Waterproof Brushless ESC & 3652/3665 SD G3 Sensored Brushless Motor for 1/10 RC Car Truck (optional)
Spur gear : 56T 32P https://a.aliexpress.com/_Ex8wB9Q
Pulley : S3M 20T, Pinion: 14T 32P (optional) Metal Pulley Component 20T Gear Upgrade Parts for Sakura S XI XIS Ultimate 1/10 Drift Racing Car
CVD: x4 TRINOOD Steel Rear CVD Drive Shaft Dogbones for 1/10 Tamiya BBX 58719 2WD Buggy Truck Upgrade Parts
DIFF: Metal 38T Gear Belt Differential Upgrade Parts for Sakura S XI XIS CS D4
Motor cooling: 540/550/3650 Motor Heat Sink Cooler Heat Fin 36mm Diameter Radiator/Cooler with DC 5V Cooling Fan for RC Model Toys Car Boat
x6 HSP 02101 Steering Plate Bushing Parts For HSP 1/10 R/C Model Car Spare Parts Hardware Fit HPI Bullet MT 3.0 WR8 Flux Redcat
Ballbearings: x12 MF105ZZ 5x10x4mm, x4 MF63ZZ 3x6x2.5mm
SCREWS: it is cheaper to buy this kit: https://a.aliexpress.com/_Eu0LyN2
Shafts for the suspension arms need 3 different lengths as follows: M3 x2 80mm /50mm, and x4 60mm
https://a.aliexpress.com/_ExtGIYu
Recommended filaments:
EasyPA for the chassis
PA6-CF for the suspension arms.
TPU72D for the body posts and shock towers
AirTPU for the bumpers