1 / 3
Mace Windu HueForge Mini Poster - 4 Colors Swap (No AMS Required!) — zdjęcie 1
1 / 3

Mace Windu HueForge Mini Poster - 4 Colors Swap (No AMS Required!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bring the power of the Jedi Master Mace Windu to life with this striking 4-color HueForge mini poster!

Ocena
0 / 5
Polubienia
4
Pobrania
7
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

🟣 Mace Windu: The Jedi Master (HueForge Mini Poster) 🟣

Capture the intensity of the legendary Jedi Master, Mace Windu, with this detailed 4-color HueForge print! Inspired by Japanese poster art, the design includes the iconic スター・ウォーズ (Star Wars) title in bold Katakana text at the top.

This is a fantastic project for anyone looking to try multi-color printing without a complex setup. The model is optimized for manual filament changes (or use your AMS/MMU if you prefer!), making it accessible to a wider audience. The stunning purple and black contrast is achieved through careful selection of filament transmission distances in HueForge, resulting in a vibrant, textured piece of fan art.

⚙ Print Settings & Filament Details

Important Note: This print is confirmed to work perfectly with manual filament swaps. No expensive multi-material system (like an AMS or MMU) is required, though you can use one for convenience!

Size: 124mm x 170mm

Base Layer Height: 0.16mm (for the starting black)

Remaining Layers: 0.08mm (as preferred, the instructions below are layer-based)

Backing: Recommend a solid white or light color backing for the best HueForge effect.

FilamentColor / DescriptionTransmission Distance
#000000PLA Anycubic black0.1
#2e376dPLA eSun dark blue0.1
#571abfPLA ELEGOO PLA PRO1.9
#ffffffPLA ELEGOO PLA Matte White5.4

This print uses 4 unique filaments.

🔄 Swap Instructions (Manual or AMS)

Follow these instructions carefully for the best results. The layers are based on a typical 0.16mm layer height for the first layer and subsequent 0.08mm layers. Always check the Z-Height in your slicer to confirm the correct swap point.

Swap Point (Layer #)Z-HeightFilament Swap ToNotes
Start0.0mm#000000 (black)Base layers
Layer #90.8mm#2e376d (dark blue) 
Layer #110.96mm#571abf (PLA PRO Purple)The main vibrant color
Layer #141.2mm#ffffff (Matte White)For the rest of the print

💡 Tip: If you're swapping manually, ensure your purge block/tower is clean before continuing after each color change!

May the Force be with your filament swaps!

Tagi