Mace Windu HueForge Mini Poster - 4 Colors Swap (No AMS Required!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bring the power of the Jedi Master Mace Windu to life with this striking 4-color HueForge mini poster!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
🟣 Mace Windu: The Jedi Master (HueForge Mini Poster) 🟣
Capture the intensity of the legendary Jedi Master, Mace Windu, with this detailed 4-color HueForge print! Inspired by Japanese poster art, the design includes the iconic スター・ウォーズ (Star Wars) title in bold Katakana text at the top.
This is a fantastic project for anyone looking to try multi-color printing without a complex setup. The model is optimized for manual filament changes (or use your AMS/MMU if you prefer!), making it accessible to a wider audience. The stunning purple and black contrast is achieved through careful selection of filament transmission distances in HueForge, resulting in a vibrant, textured piece of fan art.
⚙ Print Settings & Filament Details
Important Note: This print is confirmed to work perfectly with manual filament swaps. No expensive multi-material system (like an AMS or MMU) is required, though you can use one for convenience!
Size: 124mm x 170mm
Base Layer Height: 0.16mm (for the starting black)
Remaining Layers: 0.08mm (as preferred, the instructions below are layer-based)
Backing: Recommend a solid white or light color backing for the best HueForge effect.
| Filament | Color / Description | Transmission Distance |
|---|---|---|
| #000000 | PLA Anycubic black | 0.1 |
| #2e376d | PLA eSun dark blue | 0.1 |
| #571abf | PLA ELEGOO PLA PRO | 1.9 |
| #ffffff | PLA ELEGOO PLA Matte White | 5.4 |
This print uses 4 unique filaments.
🔄 Swap Instructions (Manual or AMS)
Follow these instructions carefully for the best results. The layers are based on a typical 0.16mm layer height for the first layer and subsequent 0.08mm layers. Always check the Z-Height in your slicer to confirm the correct swap point.
| Swap Point (Layer #) | Z-Height | Filament Swap To | Notes |
|---|---|---|---|
| Start | 0.0mm | #000000 (black) | Base layers |
| Layer #9 | 0.8mm | #2e376d (dark blue) | |
| Layer #11 | 0.96mm | #571abf (PLA PRO Purple) | The main vibrant color |
| Layer #14 | 1.2mm | #ffffff (Matte White) | For the rest of the print |
💡 Tip: If you're swapping manually, ensure your purge block/tower is clean before continuing after each color change!
May the Force be with your filament swaps!