Scar-Like Modest Blaster Stock (SLMBS) A NO hardware buffertube stock based on the MBS system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A futuristic styled stock using the Modest Blaster Stock system
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used the MBS stock platform to create a modern or futuristic butt stock design for buffer tube systems. It is about 6 and a half cm longer than the MBS stock originally, so it isn't super perfect for a cqc setup. Use the original parts for the buffer tube on the MBS stock page (found here: https://www.printables.com/model/1323996-modest-blaster-stock-mbs-for-nerf-blasters-and-air or just go to the remix link on the page here) i personally prefer the buff alt locking pin for the stock. Stock fits super well on the blasters i have tested it on, the Worker Seagull and Harrier and GF Trion, and locks really well with the recommended catch.
Note- the version named "wider" is designed to not have a gap between the stock body and the faux adjustment trigger, i haven't tested it. I'm uploading it and would recommend printing it instead of the stock i printed. Keep in mind the non "wider" version works anyway and I've had no problems.