Liczymy pasujące modele…
🏆 World Cup 2026 ⚽ The Adidas official ball for the 2026 FIFA World Cup has been revealed, called TRIONDA. It features a triplet design of: Canada, represented by red and a maple leaf USA, represented by blue and a star Mexico,…
Game Face Trion dart blaster. replaces the original barrel retaining socket with a Clamp, so that the 16mm aluminum tip is exposed. This allows for mounting standard SCAR attachments, etc. hardware needed: -3x12mm bolt, with a socket head…
A trigger shoe for the Game Face Trion dart blaster. I found the flat faced trigger to be uncomfortable, especially given the heavy pull. this wide and curved trigger shoe spreads out the pressure felt by your finger. Snap-on part. must…
This is a carry handle for the Game Face Trion. It clamps to the top rail and gives you... a carry handle. It also has iron sights integrated into it ands more rail for adding an optic if you want. It acts as a nice riser for an optic…
cool sleek decoration for dota fans stand can be modified to show username too originaly made it for my friend timo (bro is litteraly addicted to dota 2 :skull:)
Pistol grip for the Game Face Trion blaster. Requires a 1/4-28 screw that is 0.75" long. Replace the grip and thumbhole stock with this piece. It also includes a spring loaded spacer holder so you can hold 2 spacers inside the grip…
Trion Muzzles & SCARs SCAR Lookalike Muzzle https://www.youtube.com/watch?v=KT8aSmv8EyI MegaXL Spigot SCAR SCAR inserts for default included Trion muzzle https://www.youtube.com/watch?v=wa9wTFDM8aU Merlynn is a 6 point SCAR, Tri is 3…
Safety Delete for the GameFace Trion dart blaster fills in the hole where the safety switch used to be print standing vertically on end.
for Game Face Trion dart blaster offset spring hook for the dart guide. This reduces the spring tension on the dart guide; I was annoyed by the resistance when closing the breech. prints without supports
A quick remix of the Trion carry handle by Gameface. Extended the length a bit and redid the screw holes for flat screws. Designed to fit my blaster design, the SPIRIT.
I present to you the first of the “trains” that run or have run on Czech railways. It is compatible with IKEA / LIDL / BRIO tracks. Supports are necessary due to shape of original train, see photo. It is recommended to use 4 screws 3.0x12…
Just a simple remix from the great Carry Handle that @blasterface_841953 made. I removed the integrated sights and changed the screws into M3x10mm and M3x6mm Heat Inserts.
Adjustable spacer for the Game Face Trion blaster. It fits on the spring guide and works on its own or with one of the other spring spacers included with the blaster. It is keyed to the spring guide so it won't rotate from…
Curvy pistol grip for the Game Face Trion blaster. Requires a 1/4-28 screw that is 0.75" long. Replace the grip and thumbhole stock with this piece. No spacer storage on this one. Files provided as-is with no warranty express or implied.…
A BCAR for your Trion. Attaches to the orange plastic muzzle attachment point. The first few times you attach/detach it, it may be very tight on the last little bit, but it should wear in to be a snug-but-doable hand twist. If you can't…
The Trion is a blaster that comes as a neat package configurable for a variety of games out of the box but doesn't include a muzzle device. 7.5 degrees was specified as a middle-ground twist ratio that isn't excessive for 200 FPS, is well…
Vertical fore grip for the Game Face Trion blaster. Uses the same self tapping screws that came with the stock fore grip. Some people like the vertical grip better than the angled grip. Files provided as-is with no warranty express or…
A collection of spring spacers for the Game Face Trion foam dart blaster, and a few different things to hold the spacers on the blaster for storage. 3 sizes of spacer: 1x is a 1:1 copy of the included Trion spacer. 2x is the length of the…
Component for the Game Face Trion that allows for use of the original stock pad and a standard pistol grip while minimizing filament cost and weight compared to the original version. Still requires the GF_Stock_V3-Key.STL part from the…
The GameFace Trion is an awesome blaster for the foam flinging community. With this upgrade it elevates it even further by extending the magazine release. Has both ambidextrous access. Included is: Magazine extension Requires M3 nut and…
Printing This is an incredibly forgiving print. You can print it with the curved top on the bed and no supports. Or place the base on the bed and enable supports if you're concerned with bed adhesion issues. Whatever your usual settings…
Attach your bcar with “ex” threads to your gameface trion or dart zone blaster! The original ex bcar barrel mounts are intended to be printed at .12mm, therefore so are these. They both need supports, touching build plate only. Print the…
Pump grip for the Game Face Trion. Requires 1 self tapping screw (M2.6 x 8mm long, 4.3mm diameter head and #1 Phillips drive). Replaces the stock angled foregrip. You can use one of the screws from taking the foregrip off. Files provided…
Vertical fore grip for the Game Face Trion blaster which stores the 2 spring spacers. Uses the same self tapping screws that came with the stock fore grip. Some people like the vertical grip better than the angled grip. Files provided…
fender support
This is a quick swap barrel kit. This kit replaces the chamber with a design that takes a dash 016 o-ring (McMaster Part# 9452K6). It also replaces the front barrel lug with a collet and nut to allow for a longer barrel to be assembled.…
Remixes the Trion BCAR for use with Sillybutt's SCAR Collet system.
Catch with the correct geometry to de-prime the blaster. Files provided as-is with no warranty express or implied. Use at your own risk. Category: Mechanical Toys
Yet another Boom grip, this time for the Game Face Trion. Takes two M5x25mm screws (I used button head, but socket head would probably also work, though it may be less comfortable on your hand). Print as exported - with the flared side…
Made this Grandpa chair for Alpha Trion so he could be displayed comfortably writing. My print pictured is a prototype and didn't have enough space for the cape/backpack. I have made more space on the final version I've uploaded here - so…
Really simple thigh gap fillers for Age of the Primes Alpha Trion. I printed in silk PLA with a 0.4mm nozzle, so be aware some minor scaling may need to be done on your own printer.
This is an expansion that I have designed for Triomino . These extra tiles have at least one edge with a “ * ” on them, this is a joker edge that can match any edge on tiles that are already on the table. The tiles are designed as…
Thingi's remix-linking thing is busted again. This design uses the MuzzleNut_v4 from https://www.thingiverse.com/thing:4929499/files Adds Sillybutts' o-ring-based barrel retention mechanism to your Trion. Replaces the orange muzzle tip…
For anyone with this part out of spec here's a design that can be 3D printed. I've tested it in my Trion with all 3 spring power levels and it performs great. However there is no guarantee as to how long this will last or how it will wear…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Files for the Trion Spectre Kit. Store spacers in your sights and quickly swap…
A quick remix to add an o-ring between the aluminum barrel and the SCAR attachment, giving a reasonable boost in range.
The Logos came off my Trion with some rubbing rubbing alcohol while I was trying to remove some duct tape residue. Decided to make a new label and gave my project a name. Built directly in Prusa Slicer; it's a bit messy. “Hard” font…
This vacuum adapter for the Festool Trion PS 300 EQ and PSB 300 EQ replaces the original suction stub. It allows the machine to be connected to the osVAC neo M25 system. Compatibility has been tested with a Festool Trion PS 300 EQ, model…
Collet for the gameface Trion. Requires the blaster to get opened and then for the stock barrel front to be taken out - this replaces the stock frontend, and uses collets that an be found here:…
This is a replacement priming block for the Trion that only needs 3 of the original screws, and both rollers and pins! When installing, remove the slamfire bar, it will not work consistently with the slamfire bar installed. You will lose…
Between 3d printing and photography, we sometimes end up with a whole bunch of SD and MicroSD cards lying around. Let's see if the wise Alpha Trion, with his penchant for recordkeeping through the eons, can help us keep those safe and…
Snack bowl inspired by Trionda Ball for World Cup 2026. Scale at your own needs Since I dont know any food safe filament it is not ment for any food, only as a decoration. Use at your own risk. Object remixed from this 3d file: "FIFA…
I took Sillybutt's Trion SCAR model, split it between the SCAR and the connector end, slapped the Little Rocket socket on the muzzle side, and the lugs on the SCAR side. There are two options for the muzzle connector: The original…
Print with 2 or more shells, top and bottom layers and a good amount(>10%) of supporting infill type, like adaptive cubic, or more than>15% for a regular infill, the layer height is not important. Top layer with concentric, fuzzy skin or…
This charger fits Streamlight Strion battery pack part 74175. Required additional components: Stainless Steel Self-tapping screws M2.5x10mm or 8mm: https://www.amazon.com/dp/B00YBMROKC Pogo pins: https://www.amazon.com/dp/B07FPKKK9W USB…
This is a model I created for work. I work in Corrections and we utilize chits to keep track of who has which gear items. I cant speak for other places, but at my work, everything else is accounted for, however the flashlights dont have…
Windows for train 810. Printed with two layers with high 0,2mm. Ironing of upper surface recommended. Printed on smooth sheet using 3DLAC. Windows are glued. Some of them are quite tiny, so patience needed! Headlights are just coloured…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Files for the Trion Spectre Kit. Store spacers in your sights and quickly swap…
A quick remix to add an o-ring between the aluminum barrel and the SCAR attachment, giving a reasonable boost in range.
Don't forget to scale to compensate for shrinkage. 100.3% seems reasonable.
Print two parts oriented as shown on picture; use “strength” profile; enable standard supports on build plate only; scale to 100.3%. After printing superglue both parts. If they don't fit tightly, reprint smaller part with adjusted scale.
This is a projector lens adapter. Right now it has a Nikon F-Mount connector. This will let you use an older Bell & Howell 4" Trionar Anastigmat ƒ/3.5 projector lens on a digital camera. Just screw the lens into the adapter and twist to…
With Alpha Trion in the fold now, we just had to do some floating cybertronian script effect like we saw in the Covenant of Primes! The back mounted effect part comes as a flat piece for easier and faster printed, and would then need to…
Continuing the Primes' display stands, here's the latest version for Alpha Trion! This hoists his logo above this head -- either in a lit up version or an opaque version as you like. For the light up version, you can opt to use the 26mm…
