1 / 6
FESTOOL TRION PS 300 EQ / PSB 300 EQ jigsaw to osVAC neo M25 – Vacuum Adapter — zdjęcie 1
1 / 6

FESTOOL TRION PS 300 EQ / PSB 300 EQ jigsaw to osVAC neo M25 – Vacuum Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vacuum adapter for Festool Trion PS 300 EQ/PSB 300 EQ jigsaw with osVAC neo M25 connection.

Ocena
0 / 5
Polubienia
4
Pobrania
17
Wydruki
0
Wyświetlenia
116
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This vacuum adapter for the Festool Trion PS 300 EQ and PSB 300 EQ replaces the original suction stub. It allows the machine to be connected to the osVAC neo M25 system.

Compatibility has been tested with a Festool Trion PS 300 EQ, model year 2026.

With the new adapter attached, the Festool jigsaw still fits in the Systainer tray as usual.

After 3D printing, make sure the clip/lever can move freely. Use a craft knife, if necessary, as shown in the photo.

I reviewed and tested other available 3D-printed adapters for the Festool Trion, but I was not satisfied with their fit, locking mechanism, or overall hold. That is why I designed this adapter from the ground up.

This model is my own design, with the osVAC neo M25 male plug body incorporated for compatibility. The osVAC neo M25 connector design is part of the osVAC neo system by: https://osvacneo.de

My Print Settings

  • Printed on: Bambu Lab A1 Mini

  • Nozzle: 0.4 mm

  • Layer height / profile: 0.20 mm Standard @BBL A1M

  • Filament: PLA

  • Nozzle diameter: 0.4 mm

  • Support: tree (auto), 30° threshold angle

  • Brim: Inner brim only, 5 mm

Tagi