Wall Mount for Einhell Cordless Chainsaw (PETG / 6 Perimeters)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Einhell chainsaw. Print in PETG with 6 perimeters for strength. Use 8mm screws. Test at your own risk!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Hi everyone,
I designed this wall mount specifically for my Einhell cordless (battery) chainsaw. It's a simple and sturdy way to store the saw in your workshop.
Important Print Settings
To ensure the mount is strong enough, I highly recommend the following settings, which I used for my own print:
Material: PETG (due to its higher durability compared to PLA)
Perimeters (Walls): 6
Infill: 20-25% should be sufficient, as the perimeters provide most of the strength.
Required Hardware
Mounting Screws: The holes are designed for 8mm screws to secure the mount to your wall. Please use appropriate wall anchors if you are not mounting directly into a stud.
---
!!! IMPORTANT: USE AT YOUR OWN RISK !!!
Disclaimer: I have printed and am using this mount myself. However, I cannot guarantee its long-term durability or the performance of your specific print. Print quality, material differences, and wall mounting all affect the final strength.
A falling chainsaw is dangerous. Please test this mount thoroughly with your saw at your own risk. I am not responsible for any damage to your tools, property, or any injuries that may occur.
I hope you find this useful! If you print it, I would love to see your Makes and hear any feedback on performance or print settings.
Happy printing!