Wall Mount for Einhell Cordless Chainsaw (PETG / 6 Perimeters)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for Einhell chainsaw. Print in PETG with 6 perimeters for strength. Use 8mm screws. Test at your own risk!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 46
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Hi everyone,
I designed this wall mount specifically for my Einhell cordless (battery) chainsaw. It's a simple and sturdy way to store the saw in your workshop.
Important Print Settings
To ensure the mount is strong enough, I highly recommend the following settings, which I used for my own print:
Material: PETG (due to its higher durability compared to PLA)
Perimeters (Walls): 6
Infill: 20-25% should be sufficient, as the perimeters provide most of the strength.
Required Hardware
Mounting Screws: The holes are designed for 8mm screws to secure the mount to your wall. Please use appropriate wall anchors if you are not mounting directly into a stud.
---
!!! IMPORTANT: USE AT YOUR OWN RISK !!!
Disclaimer: I have printed and am using this mount myself. However, I cannot guarantee its long-term durability or the performance of your specific print. Print quality, material differences, and wall mounting all affect the final strength.
A falling chainsaw is dangerous. Please test this mount thoroughly with your saw at your own risk. I am not responsible for any damage to your tools, property, or any injuries that may occur.
I hope you find this useful! If you print it, I would love to see your Makes and hear any feedback on performance or print settings.
Happy printing!