1 / 1
IKEA VIDJA Divider Replacement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Like it? Support me.
Website: https://pixelglance.com
Buy Models: https://cults3d.com/en/users/PixelGlance
Summary
This is a shade ring replacement part for the IKEA VIDJA floor lamp. Recreated with precise measurements from the original parts, while improving the centre clip-on strength.
The "Original" Variant has the original thin wall thickness, thus would look identical to the original from the outside.
The “Thicker” Variant has some increased wall thickness. So the outer diameter will vary from the original by aprox 1mm, while the total height will also be a tiny bit higher, making it somewhat harder to attach the very top part. I simply included this to have improved part strength over the original variant.