Dehydrator extensions for filament drying
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Dehydrator height extensions to make a filament dryer.
I've tried to make these really robust. They print with no supports on the solid part, and supports only on the upper side of the window for the part with the humidity gauge. They'll happily print at 5% infill as long as you check the first layer for adhesion (0% should also work but haven't tried, at max extrusion and max speed.
The ones in the photo look rough - but they're printed at 0.4mm layer height with a 0.4mm nozzle and with the speed cranked up as much as possible. They look way nicer when you're not rushing them. They take about an hour per piece.
Print them with the curved connector pointing down. It won't need supports.
Enjoy!