1 / 8
Frog from Sledding Game — zdjęcie 1
1 / 8

Frog from Sledding Game

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Frog model with magnets in head and back (for fashion accessories and sled, coming soon)

Ocena
0 / 5
Polubienia
8
Pobrania
28
Wydruki
0
Wyświetlenia
393
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial

Modeled this cute frog with a dumpster truck butt from the upcoming game Sledding Game.

Made in Fusion 360, pre-sliced in OrcaSlicer.

Feel free to create your own accessories and sleds. The provided STEP file should help you with the perfect fit!

🐸 🛷 PRINTING

Print everything in the colors of your choice, no one stops you from being fancy and creative!
Obviously you will need 3 connectors, all other parts just once.
If you don't want to use the prepared 3MF file use supports for both body parts. The offset surface is intentional. You can press both halves together with some light pressure to eliminate the gap.

🛠 🧲 ASSEMBLY

Technically you only need to glue in the front body parts. The internal connectors are designed for a press fit. You can then separate both halves with a sharp tool later if needed. Do not use glue for the outer edge because it will leak out and ruin the finished model.

Insert 2x 2 magnets (cylinder, 8x3mm) into the head and back and glue them in. For the back a good advise is to fixate the magnets with the two other magnets from the outside of the model (see pictures).

💕 SHOUTOUT

Greetings and all credits go to The Sledding Company. The demo was fantastic already and I'm looking into many hours of sledding and chilling in the future.

Leave a like on Social Media and wishlist the game on Steam!

Tagi