Antique Pocket Door Folding Skeleton Keys - Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reproduced functional keys for my turn-of-the-century pocket doors.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Info
My turn-of-the-century house came with gorgeous pocket doors, but I lost the cool folding key that let me unlock and fully open the doors while leaving the key in the door.
To fix that, I designed this one based on an old skeleton key that fit the lock, and included a hinge in the middle of the key that's strong enough to turn the lock, but will allow you to fold the key flat in the escutcheon.
I also included a second key I designed that is a more traditional antique folding pocket door design vs the longer skeleton key style one. 
If you have a differently sized key let me know the dimensions and I can add a model for you.
Print Settings
Printed the skeleton key style one with supports on in PETG w/ high infill, I used a bit of a raft to try and make the bottom surface nicer. Any layer height you wish.
For the traditional one, I did a test print in PLA in .16 with normal supports on, 70% infill for the whole key and 100% infill on the key blade part, and it was so good I decided not to reprint in PETG. Used Orca Slicer to add a cube modifier for 100% infill on the keyblade part only.