1 / 7
Antique Pocket Door Folding Skeleton Keys - Print in Place — image 1
1 / 7

Antique Pocket Door Folding Skeleton Keys - Print in Place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reproduced functional keys for my turn-of-the-century pocket doors.

Rating
0 / 5
Likes
7
Downloads
20
Makes
0
Views
107
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution

Info

My turn-of-the-century house came with gorgeous pocket doors, but I lost the cool folding key that let me unlock and fully open the doors while leaving the key in the door.

To fix that, I designed this one based on an old skeleton key that fit the lock, and included a hinge in the middle of the key that's strong enough to turn the lock, but will allow you to fold the key flat in the escutcheon.

I also included a second key I designed that is a more traditional antique folding pocket door design vs the longer skeleton key style one. 

If you have a differently sized key let me know the dimensions and I can add a model for you.

 

Print Settings

Printed the skeleton key style one with supports on in PETG w/ high infill, I used a bit of a raft to try and make the bottom surface nicer. Any layer height you wish.

For the traditional one, I did a test print in PLA in .16 with normal supports on,  70% infill for the whole key and 100% infill on the key blade part, and it was so good I decided not to reprint in PETG. Used Orca Slicer to add a cube modifier for 100% infill on the keyblade part only.

Tags