Ford Maverick Mini Cubby to Cup Holder Convert (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a way to turn the mini cubby in the Ford Maverick into a 3rd cupholder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Ah the Ford Maverick “mini cubby.” it's the small cup next to the cup holders.
I designed a three piece insert to make a third 82mm cup holder. The Cubby Insert is upside and should be printed that way. If you don't have a way to glue it, print the “two piece” file, and use minimal tree supports.
I recommend the “three piece” file, and using a hot glue gun to attach the cup holder and lid together. I used a “hilbert curve” surface pattern (anything more rigged or jagged will do) and applied it to the top of the lid and the bottom surface pattern on the cup holder. This makes the hot glue gun more effective but is unnecessary.
The lid should hitch in and secure, then put it in the mini cubby as one piece. Pull straight up to remove, or push forward to remove the lid
. I hope you enjoy :))