Modular Spice Rack for IKEA Metod with Underverk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Choose the size for your Spice Rack and assemble as needed
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Idea
This model was heavily inspired by ventrue3000's design. I liked the idea but wanted something that doesn't require splitting in the Slicer and that could be printed in any size, so I designed this modular version.
The idea is to use the space in an IKEA Metod cabinet with an Underverk extractor hood for spices.
The holes are 4.5 cm in diameter and 6.9 cm deep. They fit most standard spices in circular containers, at the very least the ones from Edora, Ostmann, Kania, Le Gusto and Fuchs.
Concept
You need at least one “EdgeLeft” and one “EdgeRight”. You can then combine them with any number of “Middle1” or “Middle3” pieces, depending on the available space.
The small pieces are all 52mm wide, the big piece is 156mm wide. If you have the 80cm wide cabinet, you can fit the 2 Edges, 1 Middle1 and 2 Middle3 pieces to fill the entire width, for a total of 26 spices.
Printing
I printed mine in PLA with 10% Infill, which should be enough, as the print will not experience any heavy loads.
When assembling, pay attention that the outward facing dovetail connectors always face to the right. Otherwise the holes will be slanted upwards and your spices will fall out.