Andersen Gliding Door Latch Turn
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repair your broken door latch turn.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
One of the ears sheared off my existing door latch thumb turn, this model fits as a perfect replacement. You will need to re-use the rest of the existing hardware.
Should fit
Andersen Part #: 2573609
Works With:
200 Series Perma-Shield Gliding Patio Door
200 Series Narroline Gliding Patio Door
400 Series Frenchwood Gliding Patio Door
A-Series Gliding Patio Door
E-Series Gliding Patio Door
Print Settings:
Printed in PETG
6 Wall loops
15% infill
Assembly:
Use a 9/16ths socket in a vice to press the hardened steel retainer washer over plastic shaft that holds the flat bar after you feed it through the trim plate.
Then use a vice to press the steel pin through the shaft and flatbar.
Works great, not sure what the longevity will be like but I suspect as long as the print was solid and you dont overly jam it when locking the door it should last quite some time.