Bosch GKF 18V-8 router base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple base with a handle for better control of the Bosch GKF 18V-8
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was heavily inspired by the Bosch GKF 18V-8 trim router base by woelpi.
I made my own, simplified version of it. I skipped the dust collection bits and made the handle a separate part that comes with a hole in the bottom for a heatset insert, This lets me easily connect it with an m5 bolt, which i added some loctite to as well. The bolt also strengthens the weakest part of the handle, especially since the forces there are along the layer lines.
I followed woelpis recommendation of printing it from a strong base material (PETG-CF) for the main body, with a few layers of ordinary PETG for extra smoothness. I also enabled ironing, and its really nice and smooth.