1 / 4
Randco Magna-Matic, Ford Ranger 2025 MagSafe charger plate — zdjęcie 1
1 / 4

Randco Magna-Matic, Ford Ranger 2025 MagSafe charger plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This charger tray works for Ford Ranger 2025 without built-in MagSafe charger unit

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My Ford Ranger 2025 is a fleet model without built-in support for MagSafe chargers. The default space for a phone is fairly tight, especially for the iPhone 16 Pro Max with Otterbox case. The goal was a plate to hold the MagSafe puck and route the cable to the side to more easily connect to USB-C. The design of the plate narrows to the front to provide headspace for the bulky Otterbox case. 

I'm in the process of creating several variations on this project (which will be uploaded over the next week as the iPhone 17 arrives next week):

  1. A version with, support edges, for an iPhone 16 Pro Max without the Otterbox case
  2. A version for the iPhone 17 with Otterbox case
  3. A version for the iPhone 17 without Otterbox case

Printing

  1. Nothing special here as I used an OPXL5H, .4 nozzles, .25 layer height, no supports
  2. I printed with Polymaker Prolite PETG, black

No assembly required, but the frame may need to be ‘flexed’ slightly when routing the cable through the frame as it is a tight fit to ensure the cable doesn't creep out. The MagSafe puck is a press fit into the frame and seems to hold tight as the phone is removed.

I recommend this cable organizer as the puck cable is 1m: https://www.printables.com/model/800029-cable-organizer-cable-clip

 

Tagi