1 / 3
Load block for 6.5 Grendel, ARC family, 7.62x39, etc — zdjęcie 1
1 / 3

Load block for 6.5 Grendel, ARC family, 7.62x39, etc

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 100-place load block for the .440" case head cartridges.

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This is a 100-place load block for the .440" case head cartridges. Holes are .015 oversized for good support and easy entry. You may have to increase the global scale in your slicer if your printer doesn't print true to size. I recommend a test fit after a few layers have been laid down. 

Print upside-down with 3+ walls, no supports required. The base is recessed so it'll sit flat on a table and be a bit forgiving to small amounts of warp while printing. 

This model has the same height as my other load blocks (not yet uploaded) so I set the Grendel trays to a Z-scale of 80% in the slicer to get a little more exposed case.