1 / 3
Load block for 6.5 Grendel, ARC family, 7.62x39, etc — image 1
1 / 3

Load block for 6.5 Grendel, ARC family, 7.62x39, etc

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a 100-place load block for the .440" case head cartridges.

Rating
0 / 5
Likes
2
Downloads
21
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This is a 100-place load block for the .440" case head cartridges. Holes are .015 oversized for good support and easy entry. You may have to increase the global scale in your slicer if your printer doesn't print true to size. I recommend a test fit after a few layers have been laid down. 

Print upside-down with 3+ walls, no supports required. The base is recessed so it'll sit flat on a table and be a bit forgiving to small amounts of warp while printing. 

This model has the same height as my other load blocks (not yet uploaded) so I set the Grendel trays to a Z-scale of 80% in the slicer to get a little more exposed case.