Improved Holiday Light Clips for Rivian Crossbars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These clips slide into the channels on the crossbars and have a mount that you can zip tie to the gap in the middle.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 369
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
If you want super consistent spacing and mounting of hoiday lights on your crossbars, this will do it for you. There are 3 main components:
4-piece Rail Insert:
Each channel in each side of each crossbar gets 2 of these. They hold 4 lights each. Mount the lights in the holders and tuck the wires into the channel underneath. Slide the piece in. Rinse and repeat. Note you don't want to slide a mount completely in until you have the 2nd one prepped and ready to go in.
Middle Gap:
These are designed to sit in the gap in the middle of the crossbar and get zip-tied down. They have a channel underneath as well.
Side Brace:
These are a 2-piece design to fit on a build plate. They also get zip-tied to the crossbars to prevent lights from flapping and banging into the sides of your truck. I use a 30mm long M3 bolt and nut to hold the 2 pieces together along with glue.
Printing/Assembly Guidelines:
Use PETG, ASA, or ABS. PLA can melt in the sun. It's not fun.