Improved Holiday Light Clips for Rivian Crossbars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These clips slide into the channels on the crossbars and have a mount that you can zip tie to the gap in the middle.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 30
- Makes
- 1
- Views
- 373
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
If you want super consistent spacing and mounting of hoiday lights on your crossbars, this will do it for you. There are 3 main components:
4-piece Rail Insert:
Each channel in each side of each crossbar gets 2 of these. They hold 4 lights each. Mount the lights in the holders and tuck the wires into the channel underneath. Slide the piece in. Rinse and repeat. Note you don't want to slide a mount completely in until you have the 2nd one prepped and ready to go in.
Middle Gap:
These are designed to sit in the gap in the middle of the crossbar and get zip-tied down. They have a channel underneath as well.
Side Brace:
These are a 2-piece design to fit on a build plate. They also get zip-tied to the crossbars to prevent lights from flapping and banging into the sides of your truck. I use a 30mm long M3 bolt and nut to hold the 2 pieces together along with glue.
Printing/Assembly Guidelines:
Use PETG, ASA, or ABS. PLA can melt in the sun. It's not fun.