1 / 1
Standing desk
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets to convert your Velbon VGB-3C into a standing desk with simple supply from hardware store.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
The brackets convert a Velbon VGB-3C into standing desk for laptop. The whole assembly uses leftover materials i have on hands, so you can tell the wood screws are too long for this application and I make tall spacer to offset the length.
Bill of Materials you need other than the brackets.
| Number | Item | Qty |
| 1 | Velbon VGB-3C (i got a used one on fb marketplace)  | 1 |
| 2 | 8x2 wood screws (from home depot) 
| 8 |
| 3 | 0.75" thick SPF board for the top platform of size you like (mine is 15" x 25") | 1 |
| 4 | 0.75" thick SPF board for the keyboard platform of size you like (mine is 11" x 22") | 1 |
Assembly instructions
- Use similar procedure to mount the keyboard platform.
- Adjust to the height you like and enjoy!
Printing setting I used
- PLA - 0.2mm
- Infill
- top desk connector: 30% infill gyroid, 4 perimeter for vertical wall
- keyboard platform bracket: 15% infill gyroid, 4 perimeter for vertical wall
- Support material is required