Modular Spice Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Spice rack designed for Costco sized spice containers
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a modular spice rack designed to fit Costco shaped spice containers (though other large containers may fit). It is designed to be configured and expanded to suit your needs and space.
For one section (3 containers) you will need to print one of each rail and two side supports.
**IMPORTANT - Mirror one of the sides in your slicer before printing.
Also included are a dog bone and dowel.
To connect 2 sections together, print 4 dog bones, and press them into the cavities on the top and bottom of the sides. Use the dowel on any side pieces that are not being joined. I printed these in TPU to act as feet so the rack wouldn't slide around. If you are not stacking, these can be scaled down to 3mm (on your x axis only) in your slicer.
To stack sections, print the dog bones and dowels as needed at full height and press the top side pieces down onto them.
Enjoy!