ANYCUBIC Photon window exhaust manifold.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Window mountable exhaust for ANYCUBIC Photon resin printer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I recently acquired an used ANYCUBIC Photon resin printer. To be safely used in my workshop it needed an air exhaust outside, but I can't exactly drill a hole in the wall due to property reasons.
So after generous amount of trial and error I designed this exhaust mechanism using a 40 mm industrial vacuum tube and 40 mm PC fan. As this is my biggest project yet, now it's in usable state, so If anyone need to solve the same problem I'm sharing it here.
Here are links to some additional parts I used but did not design:
Inner 40 mm connector: https://www.printables.com/model/446046-anycubic-photon-air-vent-system
40 mm hole backplate: https://www.printables.com/model/103444-anycubic-photon-backplate-with-fan-duct-bypass