1 / 8
Creality K1 Unibody Riser - Japanese Shrine Mod with Sliding Windows — zdjęcie 1
1 / 8

Creality K1 Unibody Riser - Japanese Shrine Mod with Sliding Windows

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Classy look for your K1

Ocena
0 / 5
Polubienia
22
Pobrania
26
Wydruki
0
Wyświetlenia
406
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Colours used:

Siddament Black PETG 

https://siddament.com.au/products/black-petg 

Siddament Gold PETG 

https://siddament.com.au/products/metallic-gold-petg-hs 

Siddament Matte Beige PLA 

https://siddament.com.au/products/matte-beige-pla

Siddament Translucent PETG 

https://siddament.com.au/products/transparent-petg-1-75mm-1kg

Creality Grey Hyper PETG

 

This riser mod is a classy way to improve the aura of your K1 printer, as well as adding the regular functions a regular riser mod provides.

IN ADDITION to this, the main inspiration of this mod is the addition of sliding windows in the place where the ‘plates’ sit, to give you the option of venting or passing cables through the gap.

Note: only one half of the window panels slide across. If you prefer a left-side sliding window you're welcome to flip the models.

This gap is primarily used for venting, and comes with an optional Filament Runout Sensor Relocation mod which pairs perfectly with the sliding windows to allow you to pass a bowden tube through easily.

The roof is connected with printable connector pegs which stack through the roof, the roof underlay, and the frame in order to create easily connectable and removeable pieces.

 

Hardware

 

K1 attachment:

  • 4x M3x6 screws

Frame assembly:

  • 8x M3x8
  • 8x M3 5x5 heat inserts

Window plate assembly:

  • Super glue (or equivalent) - Use this to glue your transparent window layer to the frame

 There is also an optional Handle.stl for the sliding window which should also be superglued on.

Then slide the side-tabs of the assembled windows into your frame before assembling the frame.

 

(Optional) Frame corner - Filament Runout Sensor mod

  • 2x PC4-M10 Pneumatic tube connectors (screw directly into the plastic)
  • Spare bowden tubing
  • Original runout sensor screws (2x M3x18 Countersunk)

Note: 

DO NOT “split object” as the piece is not combined, only assembled due to bad geometry. It will print fine.

This is mounted “back-to-front” with the cable connector pointing DOWN. You will need to release the cable from the zip ties underneath the printer to give it more length, or the cable will not reach. The cable is marked with a “Filament runout” label and it grouped with other cables. I recommend re-ziptying the other cables after freeing it.

Print settings

 

Frame and window pieces must be printed in PETG (or equivalent heat resistant material) as the K1 chamber easily crests 40C, which will bend and deform PLA very quickly.

Window plate pieces can be printed in transparent PETG / PCTG for a nice see-through effect, but do not necessarily need to be transparent filament to pass light through at only 2 layers height. Transparent filament will just make it incredibly clear if you turn off “rotate solid infill” so the layer lines all stack in the same direction.

  • 0.2 layer height for best results
  • Tree supports - Auto
  • All files should be pre-oriented

 

Optional Shrine Stairs cover for the screen. Use paint-on Perlin fuzzy skin for a nice stone effect.

Tagi