SV08 Tool Changer – Stealth Changer magnetic tool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SV08 Tool Changer – Stealth Changer magnetic tool holder
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an enhanced version of the spacer for the modular dock from the DraftShift Design system. In this model, I’ve added four pockets for magnets, allowing for quick, solid, and flexible connections between dock and toolhead.
For the tool head connection, I used thin 15 mm self-adhesive metal plates, providing a clean and precise magnetic interface. These can easily be sourced on Amazon:
https://www.amazon.de/dp/B0CWRPS2Q2?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Recommended materials are PETG, ABS, or ASA, depending on your environmental and mechanical needs. PETG offers good all-around strength and printability, while ABS and ASA are better suited for higher temperature .
Use 10x2 mm magnets.