SV08 Tool Changer – Stealth Changer magnetic tool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SV08 Tool Changer – Stealth Changer magnetic tool holder
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 11
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is an enhanced version of the spacer for the modular dock from the DraftShift Design system. In this model, I’ve added four pockets for magnets, allowing for quick, solid, and flexible connections between dock and toolhead.
For the tool head connection, I used thin 15 mm self-adhesive metal plates, providing a clean and precise magnetic interface. These can easily be sourced on Amazon:
https://www.amazon.de/dp/B0CWRPS2Q2?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Recommended materials are PETG, ABS, or ASA, depending on your environmental and mechanical needs. PETG offers good all-around strength and printability, while ABS and ASA are better suited for higher temperature .
Use 10x2 mm magnets.