Smaller StrayCat's Stable Foot Ikea Metod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smaller feet tube and screw than original feet
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a more solid feet than the original Ikea Metod, and StrayCat feet seems perfect for the upgrade.
But i wanted to use Ikea plinth which is 8cm large, and StrayCat feet is 9.2cm large
As no step files were available, i remade the entire feet smaller
Thread seems to be custom, so i made a custom one through Fusion360 using these inputs :
<Size>23.0</Size>
<Designation>
<ThreadDesignation>M23x3</ThreadDesignation>
<CTD>M23x3</CTD>
<Pitch>3.0</Pitch>
<Thread>
<Gender>external</Gender>
<Class>6g</Class>
<MajorDia>22.7645</MajorDia>
<PitchDia>20.9067</PitchDia>
<MinorDia>19.3334</MinorDia>
</Thread>
</Designation>then applied a 0.05mm offset on each side of the thread
Be careful to print the feet tube on the correct side (no support needed)
Removed previously provided step files because there is an issue generating this custom thread, sorry.