1 / 5
Katzenstreu Schaufel/Cat Litter Shovel — zdjęcie 1
1 / 5

Katzenstreu Schaufel/Cat Litter Shovel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Katzenstreu Schaufel mit Tütenhalter. Praktische Katzenstreu Schaufel für Abfall. Ohne die Hände schmutzig zu machen.

Ocena
0 / 5
Polubienia
5
Pobrania
22
Wydruki
0
Wyświetlenia
249
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Katzenstreu-Schaufel mit Müllsackhalterung.
2-teilig mit Griff: Sack durchfädeln, Griff einstecken, rausschaufeln, zerlegen, Müll entsorgen und Schaufel reinigen.

Gedacht für eine einfache, saubere Lösung beim Reinigen der Katzentoilette – ohne zusätzliches Gefummel.

Gedruckt wurde das Modell mit einem Sovol SV06, 0,4 mm Düse und 0,2 mm Schichthöhe.


⚙ Features

  • 🐱 Integrierte Müllsackhalterung

  • 🧩 2-teiliges System – einfach zerlegbar

  • 🧼 Leicht zu reinigen

  • 🗑 Direktes Entsorgen ohne Umfüllen

  • 🧼 Funktionales, durchdachtes Design


🖨 Druckeinstellungen (Empfohlen)

  • Material: PETG empfohlen

  • Infill: 20–40 %

  • Schichthöhe: 0.2 mm

  • Düse: 0.4 mm

  • Supports: ❌ nicht nötig

  • Ausrichtung: wie im STL vorgesehen


💡 Hinweis zur Materialwahl

Da das Modell mit Katzenstreu, Urin und Verschmutzungen in Kontakt kommt:

  • PLA ist grundsätzlich möglich, kann aber auf Dauer Gerüche aufnehmen und ist weniger hitzebeständig

  • PETG oder ABS sind besser geeignet, da sie robuster und hygienischer sind

  • Für maximale Hygiene:
    → regelmäßig reinigen und ggf. mit höherer Wandstärke drucken


💡 Tipp

  • Für mehr Stabilität:
    → höheres Infill oder zusätzliche Perimeter verwenden

  • Für bessere Reinigung:
    → glatte Druckoberfläche (z. B. mit leicht höherer Temperatur)


📸 Zeig dein Ergebnis

Wenn du das Teil druckst, zeig es gerne!
Lade ein Make hoch – würde mich freuen zu sehen, wie du es nutzt 🔥



Cat litter scoop with integrated trash bag holder.
Two-part design with handle: thread the bag through, insert the handle, scoop, disassemble, dispose, and clean.

Designed for a simple and clean way to clean the litter box without extra hassle.

Printed on a Sovol SV06 using a 0.4 mm nozzle and 0.2 mm layer height.


⚙ Features

  • 🐱 Integrated trash bag holder

  • 🧩 2-part design – easy to disassemble

  • 🧼 Easy to clean

  • 🗑 Direct disposal without transferring

  • 🧼 Functional, well-thought-out design


🖨 Print Settings (Recommended)

  • Material: PETG recommended

  • Infill: 20–40 %

  • Layer Height: 0.2 mm

  • Nozzle: 0.4 mm

  • Supports: ❌ not required

  • Orientation: as provided in the STL


💡 Material Note

Since this model comes into contact with litter, urine, and waste:

  • PLA works, but may absorb odors over time and is less heat resistant

  • PETG or ABS are better choices for durability and hygiene

  • For better hygiene:
    → clean regularly and consider thicker walls


💡 Tip

  • For more strength:
    → use higher infill or more walls

  • For easier cleaning:
    → aim for smoother print surfaces


📸 Make it yours

If you print it, show it off!
Feel free to upload a Make – I’d love to see how you use it 🔥

Tagi