Katzenstreu Schaufel/Cat Litter Shovel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Katzenstreu Schaufel mit Tütenhalter. Praktische Katzenstreu Schaufel für Abfall. Ohne die Hände schmutzig zu machen.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Katzenstreu-Schaufel mit Müllsackhalterung.
2-teilig mit Griff: Sack durchfädeln, Griff einstecken, rausschaufeln, zerlegen, Müll entsorgen und Schaufel reinigen.
Gedacht für eine einfache, saubere Lösung beim Reinigen der Katzentoilette – ohne zusätzliches Gefummel.
Gedruckt wurde das Modell mit einem Sovol SV06, 0,4 mm Düse und 0,2 mm Schichthöhe.
⚙ Features
🐱 Integrierte Müllsackhalterung
🧩 2-teiliges System – einfach zerlegbar
🧼 Leicht zu reinigen
🗑 Direktes Entsorgen ohne Umfüllen
🧼 Funktionales, durchdachtes Design
🖨 Druckeinstellungen (Empfohlen)
Material: PETG empfohlen
Infill: 20–40 %
Schichthöhe: 0.2 mm
Düse: 0.4 mm
Supports: ❌ nicht nötig
Ausrichtung: wie im STL vorgesehen
💡 Hinweis zur Materialwahl
Da das Modell mit Katzenstreu, Urin und Verschmutzungen in Kontakt kommt:
PLA ist grundsätzlich möglich, kann aber auf Dauer Gerüche aufnehmen und ist weniger hitzebeständig
PETG oder ABS sind besser geeignet, da sie robuster und hygienischer sind
Für maximale Hygiene:
→ regelmäßig reinigen und ggf. mit höherer Wandstärke drucken
💡 Tipp
Für mehr Stabilität:
→ höheres Infill oder zusätzliche Perimeter verwendenFür bessere Reinigung:
→ glatte Druckoberfläche (z. B. mit leicht höherer Temperatur)
📸 Zeig dein Ergebnis
Wenn du das Teil druckst, zeig es gerne!
Lade ein Make hoch – würde mich freuen zu sehen, wie du es nutzt 🔥
Cat litter scoop with integrated trash bag holder.
Two-part design with handle: thread the bag through, insert the handle, scoop, disassemble, dispose, and clean.
Designed for a simple and clean way to clean the litter box without extra hassle.
Printed on a Sovol SV06 using a 0.4 mm nozzle and 0.2 mm layer height.
⚙ Features
🐱 Integrated trash bag holder
🧩 2-part design – easy to disassemble
🧼 Easy to clean
🗑 Direct disposal without transferring
🧼 Functional, well-thought-out design
🖨 Print Settings (Recommended)
Material: PETG recommended
Infill: 20–40 %
Layer Height: 0.2 mm
Nozzle: 0.4 mm
Supports: ❌ not required
Orientation: as provided in the STL
💡 Material Note
Since this model comes into contact with litter, urine, and waste:
PLA works, but may absorb odors over time and is less heat resistant
PETG or ABS are better choices for durability and hygiene
For better hygiene:
→ clean regularly and consider thicker walls
💡 Tip
For more strength:
→ use higher infill or more wallsFor easier cleaning:
→ aim for smoother print surfaces
📸 Make it yours
If you print it, show it off!
Feel free to upload a Make – I’d love to see how you use it 🔥