1 / 5
Boillie roller for carp fishing 30mm COMMERCIAL LICENCE — zdjęcie 1
1 / 5

Boillie roller for carp fishing 30mm COMMERCIAL LICENCE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

100% printable, with added "rails" to make it as quiet and easy to use as possible

Ocena
0 / 5
Polubienia
6
Wydruki
0
Wyświetlenia
293
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Commercial Use - No Derivative

💬 Summary

A boilie rolling table set designed for creating fishing baits, such as carp boilies. The system is comprised of a main rolling board featuring seven rolling channels, three rolling sticks, a small, round element (likely for dough portioning), and a rectangular storage container. All components are designed for the efficient and rapid formation of round boilies. If u purchase model you can sell it :)

 

📝 Description

This model is a complete system for the self-production of boilies with a diameter of 30mm (or less if you decide to scale it). The main rolling board features a raised upper edge with seven semi-cylindrical grooves, which allow for the simultaneous rolling of multiple baits. This design significantly speeds up the bait-making process.

The complete set includes:

Main Rolling Table

TPU anti-slip pads

Handle

Rails (must be permanently adhered using glue to the rolling table rails)

 

🖨 Print Settings

This model was designed with the necessary durability and functionality for bait maiking conditions.

Top and bottom parts are ment to be printed VERTICALLY.

Material: PETG (recommended due to better resistance to oils, moisture, and sunlight).

Nozzle Size: 0.4 mm

Layer Height: (0.20 / 0.24 mm or even more it doesn't affect functionality)

Wall Loops: 4 (for maximum rigidity and strength, especially for the main board).

Top/Bottom Layers: 5

Infill Percentage: 20%

Infill Type: Cubic or Grid

Supports: No (Model designed to avoid the need for supports, upper board has 35 deg angle on the possible brigde area).

Brim/Raft: No (Usually not required, recommended only if adhesion issues occur).

Bed Adhesion: Clean the bed thoroughly with soap-water or IPA to ensure secure adhesion.

 

💡 Assembly Steps:

The handle, guides, and TPU pads must be glued into place as part of the assembly.

Tagi