Boillie roller for carp fishing 30mm COMMERCIAL LICENCE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100% printable, with added "rails" to make it as quiet and easy to use as possible
- Rating
- 0 / 5
- Likes
- 6
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Commercial Use - No Derivative
💬 Summary
A boilie rolling table set designed for creating fishing baits, such as carp boilies. The system is comprised of a main rolling board featuring seven rolling channels, three rolling sticks, a small, round element (likely for dough portioning), and a rectangular storage container. All components are designed for the efficient and rapid formation of round boilies. If u purchase model you can sell it :)
📝 Description
This model is a complete system for the self-production of boilies with a diameter of 30mm (or less if you decide to scale it). The main rolling board features a raised upper edge with seven semi-cylindrical grooves, which allow for the simultaneous rolling of multiple baits. This design significantly speeds up the bait-making process.
The complete set includes:
Main Rolling Table
TPU anti-slip pads
Handle
Rails (must be permanently adhered using glue to the rolling table rails)
🖨 Print Settings
This model was designed with the necessary durability and functionality for bait maiking conditions.
Top and bottom parts are ment to be printed VERTICALLY.
Material: PETG (recommended due to better resistance to oils, moisture, and sunlight).
Nozzle Size: 0.4 mm
Layer Height: (0.20 / 0.24 mm or even more it doesn't affect functionality)
Wall Loops: 4 (for maximum rigidity and strength, especially for the main board).
Top/Bottom Layers: 5
Infill Percentage: 20%
Infill Type: Cubic or Grid
Supports: No (Model designed to avoid the need for supports, upper board has 35 deg angle on the possible brigde area).
Brim/Raft: No (Usually not required, recommended only if adhesion issues occur).
Bed Adhesion: Clean the bed thoroughly with soap-water or IPA to ensure secure adhesion.
💡 Assembly Steps:
The handle, guides, and TPU pads must be glued into place as part of the assembly.