1 / 4
Buddy3D Prusa XL Enclosure Mount - with tighter fit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buddy3D Prusa XL Enclosure Mount - with tighter fit
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 2
- Wyświetlenia
- 212
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (11)Powiązane
This is almost identical to @CamRodandChief 's awesome original, except that the camera is held more firmly in place.
I printed it on a Prusa XL with Prusament PETG using the 0.15mm STRUCTURAL profile and organic supports.
Same as the original, you will need;
2 x M3 nuts
2 x M3 10mm bolts
NB: The nuts are a snug fit, which can be pulled in using a bolt before fitting to the enclosure.
