1 / 4
Buddy3D Prusa XL Enclosure Mount - with tighter fit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Buddy3D Prusa XL Enclosure Mount - with tighter fit
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 46
- Makes
- 2
- Views
- 212
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is almost identical to @CamRodandChief 's awesome original, except that the camera is held more firmly in place.
I printed it on a Prusa XL with Prusament PETG using the 0.15mm STRUCTURAL profile and organic supports.
Same as the original, you will need;
2 x M3 nuts
2 x M3 10mm bolts
NB: The nuts are a snug fit, which can be pulled in using a bolt before fitting to the enclosure.
